Description
EnGenius Controller Managed Solution
The EnGenius Controller Managed wireless management products can be mixed and matched to create ideal wireless connectivity solutions for hotels, resorts, high schools, universities, corporate campuses, sports stadiums and arenas and for other companies and organizations.
This is a scalable solution for operations that occupy large properties and that need to deploy, monitor, and manage numerous EnGenius EWS Wireless Access Points from one simple and accessible browser-based software platform. EWS Switches can support any small number of EWS Wireless Access Points to several hundred depending on the number of EWS Switches in the network.
The EWS330AP can operate as a stand-alone Access Point connecting to third-party PoE-capable switches but more control and versatile management of the Access Point is achievable when it is part of an EnGenius wireless network management solution because the AP includes firmware that enables it to be immediately discovered, configured, monitored and managed from a compatible Neutron Series PoE+ Switch.
Provide Consistent Performance
The access point is designed with powerful RF interfaces to assure the reliability and strength of signal and sensitivity in a pervasive environment. The interfaces provide even coverage to help users reduce dead spots in their wireless configuration and boost received signal quality to deliver up to 1.26 Gbps throughput to wireless client devices.
Carry multimedia content using MU-MIMO and Beamforming technology
Being an AC1300 solution, the EWS330AP is not only built with powerful RF interfaces, but it also features MU-MIMO (Multi-Users Multiple input Multiple output). It also supports Transmit Beamforming (TxBF) technology. The significant improvement on 802.11ac wave 2 is MU-MIMO technology, which enhances the performance and transmission to wireless client devices. MU-MIMO allows multiple spatial streams to be used to different clients simultaneously, which reduces latency, increases throughput, capacity and spectral efficiency of the wireless network. Transmit Beamforming (TxBF) is a standard in the 802.11ac wave 2 specification that allows access points to focus the energy of multiple antennas to transmit to a particular client device in the direction of that client. The innovative technology significantly enhances signal-to-noise ratio and creates a higher throughput to clients. With MU-MIMO and Beamforming technology, the EWS330AP indoor access points can bring more traffic to wireless client devices simultaneous over a longer distance and save time for serving other wireless client devices.
Simplified Management and Configuration over ezMaster or EWS Management Switch
EWS-series managed Access Points are designed to work with EWS-series Wireless Management Switches and ezMaster management platform for scalable and flexible wireless management applications. Whether you want to manage a few or up to 1000 Access Points and switches, on network in different locations, with different segments or 10 to 10,000 users, the EnGenius ezMaster platform makes these management and configurations simplified for centralizing bulk configuration, provision and monitoring which means lower operating and maintenance cost from a local or remote server or in the cloud. With a small scope or maximum of 50 clients, a managed system is a requirement, the EWS management switches can perform auto-discovery to search EWS managed Access Points. The administrator can easily use individual or cluster settings to fast deploy numbers of Access Points with desired settings, saving repetitive configuration tasks. If the connection to your ezMaster platform is lost SmartSync Redundancy will automatically store syslog and statistics from the APs. When the connection is re-established, all information will be re-synchronized and sent to ezMaster Management platform. Administrators will not miss any statistics and reports.
Configure with EnWiFi, a simple Wi-Fi configuration and management tool for EnGenius outdoor and indoor Wi-Fi devices. Users can configure devices on-site and monitor the installed or deployed devices on their smartphones or tablets.
Specification
Access Point Type | Indoor, dual radios concurrent, 5GHz 802.11 ac 2×2 MIMO is back- wards compatible with 802.11 a/n mode, 2.4GHz 802.11 n 2×2 MIMO is backwards compatible with 802.11 b/g. |
---|---|
SU-MIMO | Two(1) spatial stream SU-MIMO for up to 1,267 Mbps wireless data rate to a single wireless client device under the both 2.4gHz and 5GHz radio. |
MU-MIMO | Two(2) spatial stream Multiple (MU)-MIMO for up to 867 Mbps wireless data rate to transmit to one(1) two streams MU-MIMO capable wireless client devices simultaneously. |
Frequency Radio | 2.4GHz: 2400MHz ~ 2484MHz, 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz Support radios and channels will be varied on the configured regulatory domain. |
Transmit Power (Maximum Value) | 2.4GHz: 26dBm 5GHz: 26dBm Maximum power is limited by regulatory domain |
Supporteddata rates (Mbps) | 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2) |
Power Source | Direct DC Input: 12V/1A Power Over Ethernet: 802.3af Input*Please note that the DC power supply is not included with this product. Since this product is normally used in a ceiling or wall mounted application then PoE is the most common power method so a DC power adapter is unlikely to be used. If you plan to power the unit directly then you will need to purchase the power supply relevant to your country. |
Antenna | 2.4GHz: 5 .0 dBi 5GHz: 5.0 dBi |
Networking Interface | One (1) 10/100/1000 BASE-T RJ-45 Ethernet Ports |
DC Powering Interface | One (1) DC Jack interface |
Ceiling Mounting | mounting bracket for ceiling mounting |
Dimensions ( Ø x H) | 132.4 x 22.4mm |
Reviews
There are no reviews yet.